TLE2082ACP

2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.000175μA 19V 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2082ACP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 275
Description: 2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.000175μA 19V 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.000175μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	700μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000175μA
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	4mV
Input Offset Current-Max (IIO)	0.00035μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Max Power Dissipation	1W
Technology	BIFET
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLE2082
Pin Count	8
Operating Supply Voltage	19V
Power Supplies	+-5/+-15V
Number of Channels	2
Operating Supply Current	3.1mA
Nominal Supply Current	3.9mA
Power Dissipation	1W
Output Current	48mA
Max Supply Current	3.9mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	4mV
Bandwidth	9.4MHz

TLE2082ACP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . As long as the supply current of the chip does not exceed 3.1mA, this op amp ic can operate. 106dB should remain the voltage gain. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 19V. Excalibur? corresponds to linear amplifier's series.