TLE2082AIDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2082 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Power Supplies | +-5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00095μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2082AIDRG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are J-FET types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 700μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 3.1mA , this buffer op amp will be able to operate. 106dB should remain the voltage gain. On this buffer amplifier, there are 2 circuits. The operating supply voltage of the buffer op amp is rated at 19V. An buffer amplifier is packed in a TR-shape according to the design. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2082AIDRG4 Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082AIDRG4 Applications
There are a lot of Texas Instruments TLE2082AIDRG4 Instrumentational OP Amps applications.
- Video amplifiers
- Voltage regulation circuit
- Weak signal detection
- Division circuits
- Addition operation circuits
- Biopotential
- Mobile phone
- Television broadcasting equipment
- Portable media players
- Information processing
