TLE2082AIP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2082 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Power Dissipation | 1W |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1MHz |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 4mV |
| Input Offset Current-Max (IIO) | 0.00095μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2082AIP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called J-FET-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 4mV. This electronic part is best mounted with type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 3.1mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 106dB at all times. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 19V. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2082AIP Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082AIP Applications
There are a lot of Texas Instruments TLE2082AIP Instrumentational OP Amps applications.
- Hand-held batteries
- Video data acquisition
- Exponential operation circuits
- earphone
- Logarithmic operation circuits
- Television
- Image computer boards
- Video amplifiers
- Industrial control system
- Multimedia playback equipment
