TLE2082CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2082 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 2 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Power Dissipation | 725mW |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.00035μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2082CDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. Op amp ic rates 6mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 3.1mA . It is recommended to keep the voltage gain at 106dB at all times. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 19V voltage. It is used TR to pack the op amps. This buffer amplifier is assigned within the Excalibur? series by its manufacturer.
TLE2082CDR Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082CDR Applications
There are a lot of Texas Instruments TLE2082CDR Instrumentational OP Amps applications.
- Portable docking station
- ECG equipment
- Instrumentation
- MP3
- Power transmission
- Automation control systems
- RF cable systems
- Communication device
- Voltage regulation circuit
- Medical imaging
