TLE2082CP

2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.000175μA 19V 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLE2082CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 249
Description: 2 Channels 48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.000175μA 19V 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLE2082
Pin Count	8
Operating Supply Voltage	19V
Power Supplies	+-5/+-15V
Number of Channels	2
Operating Supply Current	3.1mA
Nominal Supply Current	3.9mA
Power Dissipation	1W
Output Current	48mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Output Current per Channel	48mA
Input Offset Voltage (Vos)	6mV
Bandwidth	9.4MHz
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	106dB
Average Bias Current-Max (IIB)	0.000175μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.1mV
Low-Bias	YES
Micropower	NO
Max Frequency	10kHz
Bias Current-Max (IIB) @25C	0.000175μA
Programmable Power	NO
Nominal Gain Bandwidth Product	9.4MHz
Max I/O Voltage	6mV
Input Offset Current-Max (IIO)	0.00035μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLE2082CP Overview

In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. A J-FET-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. For this electronic part, it is recommended that you mount it with type Through Hole. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Operational amplifier can operate supply current at 3.1mA. The voltage gain should stay at 106dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 19V. As the name implies, Excalibur? refers to the series of the buffer op amp.