TLE2084ACN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLE2084 |
| Pin Count | 14 |
| Operating Supply Voltage | 19V |
| Number of Elements | 4 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 1.15W |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 4mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2084ACN Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. A J-FET-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. An 14-pin op amp ic is included in the package. There is an input offset voltage of 4mV for this buffer op amp. It is recommended that this electronic component be mounted using the Through Hole mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. 106dB should be the voltage gain. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 19V voltage. The Excalibur? stands for the buffer op amp's serial number.
TLE2084ACN Features
14 Pins
supply voltage of 5V
106dB voltage gain
TLE2084ACN Applications
There are a lot of Texas Instruments TLE2084ACN Instrumentational OP Amps applications.
- Blood pressure sensors
- Switching amplifier
- Logarithmic operation circuits
- PDA
- Tablets
- Inverse/same-phase proportional circuit
- Commercial audio systems
- single/dual op amp sum and difference circuits
- Broadcasting
- ECG equipment
