banner_page

TLE2084CDW

4 Channels 48mA per Channel 25pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2084 16 Pins 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLE2084CDW
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 175
  • Description: 4 Channels 48mA per Channel 25pA 70 dB Instrumentational OP Amps 0.005μA 19V 4.5V~38V ±2.25V~19V TLE2084 16 Pins 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tube
Series Excalibur™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIFET
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number TLE2084
Pin Count 16
Operating Supply Voltage 19V
Number of Channels 4
Operating Supply Current 6.5mA
Nominal Supply Current 7.5mA
Power Dissipation 1.025W
Output Current 48mA
Slew Rate 45V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 70 dB
Current - Input Bias 25pA
Voltage - Supply, Single/Dual (±) 4.5V~38V ±2.25V~19V
Output Current per Channel 48mA
Input Offset Voltage (Vos) 7mV
Bandwidth 10MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 9400 kHz
Voltage Gain 106dB
Average Bias Current-Max (IIB) 0.005μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 1.6mV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.000175μA
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 9.4MHz
Max I/O Voltage 7mV
Height 2.65mm
Length 10.3mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLE2084CDW Overview


In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. This is a J-FET type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 16 terminations have been reported in the past few weeks. Buffer amplifier has a total of 16 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 16 pins on this chip. Regarding input offset voltage, op amp rates 7mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. You can run this op amp ic on 6.5mA . 106dB should remain the voltage gain. There are 4 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 19V voltage. In this case, Excalibur? represents the instrumentation amplifiers' series number.

TLE2084CDW Features


16 Pins
supply voltage of 5V
106dB voltage gain

TLE2084CDW Applications


There are a lot of Texas Instruments TLE2084CDW Instrumentational OP Amps applications.

  • Strain gauges
  • Active probe
  • PDA
  • Commercial audio systems
  • earphone
  • Exponential operation circuits
  • Weighing systems
  • Video amplifiers
  • Test equipment
  • Portable docking station

Write a review

Note: HTML is not translated!
    Bad           Good