TLE2084CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLE2084 |
| Pin Count | 14 |
| Operating Supply Voltage | 19V |
| Number of Elements | 4 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 1.15W |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 9.4MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.6mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 7mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2084CN Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. Buffer amps of this type are called J-FET-types. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. In this case, there are 14 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 14 pins. There is an input offset voltage of 7mV for this buffer op amp. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. An 6.5mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 106dB. Op amp has total of 4 elements. The operating supply voltage of the buffer op amp is rated at 19V. Instrumentation amplifiers are numbered by their Excalibur? series.
TLE2084CN Features
14 Pins
supply voltage of 5V
106dB voltage gain
TLE2084CN Applications
There are a lot of Texas Instruments TLE2084CN Instrumentational OP Amps applications.
- Home audio systems
- Radiation thermometry transducers
- Fission chambers
- Gaming industry
- Power transmission
- Computer workstations
- Integrator circuits
- Broadcasting
- Large motor controllers
- Automatic control
