TLE2141AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2141 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 4.5mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 175μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 1mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2141AIDR Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 15V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 1mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. As long as the supply current of the chip does not exceed 3.5mA, this op amp ic can operate. 106.85dB should remain the voltage gain. The total number of elements in this buffer amplifier is 1. The operating supply voltage of instrumentation amplifier is rated 22V voltage. An buffer amplifier is packed in a TR-shape according to the design. The Excalibur? stands for the buffer op amp's serial number.
TLE2141AIDR Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2141AIDR Applications
There are a lot of Texas Instruments TLE2141AIDR Instrumentational OP Amps applications.
- ECG equipment
- Radar
- Weighing systems
- Band-pass filter
- High input resistance broadband
- Polarized electrodes
- Displayers for aircraft and air transportation control systems
- Switching amplifier
- Precision measurement
- Power generator
