TLE2142AMDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2142 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 6.9mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 5.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 275μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.9MHz |
| Max I/O Voltage | 750μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2142AMDG4 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. An 6.9mA volt supply current is needed for this linear amplifier to operate. 106.85dB should be the voltage gain. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 22V. An buffer amplifier is packed in a TR-shape according to the design. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2142AMDG4 Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142AMDG4 Applications
There are a lot of Texas Instruments TLE2142AMDG4 Instrumentational OP Amps applications.
- Industrial control system
- Wireless base stations
- Measurements of Wheatstone bridge
- Exponential operation circuits
- Laptop
- Image computer boards
- Power control
- Automatic control
- Commercial audio systems
- Medical instruments
