Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TLE2142 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
22V |
Power Supplies |
5/+-15V |
Number of Channels |
2 |
Operating Supply Current |
6.9mA |
Nominal Supply Current |
9mA |
Output Current |
50mA |
Slew Rate |
45V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
700nA |
Voltage - Supply, Single/Dual (±) |
4V~44V ±2V~22V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1.9mV |
Bandwidth |
5.8MHz |
Gain Bandwidth Product |
5.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
6000 kHz |
Voltage Gain |
106.85dB |
Average Bias Current-Max (IIB) |
1.6μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
290μV |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
5.8MHz |
Max I/O Voltage |
1.9mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.1μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2142CD Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. The input offset voltage is 1.9mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 6.9mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 106.85dB at all times. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. Excalibur? corresponds to linear amplifier's series.
TLE2142CD Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142CD Applications
There are a lot of Texas Instruments TLE2142CD Instrumentational OP Amps applications.
- Portable docking station
- Active probe
- Blood pressure sensors
- Signal amplification
- MP3
- Tablets
- Band-stop filter
- Subtraction operation circuits
- Video amplifiers
- High gain DC amplifier