TLE2142CDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2142 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 6.9mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.9mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 290μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2142CDRG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 1.9mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureUsing a supply current of 6.9mA , this buffer op amp will be able to operate. Keeping the voltage gain at 106.85dB is the best course of action. The total number of elements in this buffer amplifier is 2. The operating supply voltage of instrumentation amplifier is rated 22V voltage. It is used TR to pack the op amps. Excalibur? corresponds to the op amp's series.
TLE2142CDRG4 Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142CDRG4 Applications
There are a lot of Texas Instruments TLE2142CDRG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Digital cameras
- Multimedia playback equipment
- Exponential operation circuits
- Home audio systems
- Displayers for aircraft and air transportation control systems
- Polarized electrodes
- earphone
- Biopotential
- Proportional counter tubes
