TLE2142IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2142 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Power Supplies | 5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 6.9mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.9mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Average Bias Current-Max (IIB) | 1.7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 290μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2142IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1.9mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . Using an 6.9mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 106.85dB for the time being. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 22V. As a result of this, the buffer amplifier is packed in TR. Excalibur? corresponds to linear amplifier's series.
TLE2142IDR Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142IDR Applications
There are a lot of Texas Instruments TLE2142IDR Instrumentational OP Amps applications.
- Power control
- Communication device
- Integrator circuits
- Power transmission
- Car stereo
- Large motor controllers
- Mobile phone
- Band-stop filter
- single/dual op amp sum and difference circuits
- PDA
