TLE2142IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TLE2142 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Power Supplies | 5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 6.9mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.9mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Average Bias Current-Max (IIB) | 1.7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 290μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 1.9mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2142IP Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.9mV. Through Hole is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . It is possible to operate this buffer amplifier from a supply current of 6.9mA . 106.85dB should remain the voltage gain. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 22V voltage. Excalibur? is the number that corresponds to the series of the buffer op amp.
TLE2142IP Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2142IP Applications
There are a lot of Texas Instruments TLE2142IP Instrumentational OP Amps applications.
- Precision measurement
- Signal filtering
- Car stereo
- Comparator
- Hand-held batteries
- Active probe
- Multiplication circuits
- Multimedia playback equipment
- Instrumentation
- Biopotential
