TLE2144AIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | TLE2144 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Power Supplies | 5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 13.8mA |
| Nominal Supply Current | 18mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 99.55dB |
| Average Bias Current-Max (IIB) | 1.7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2144AIN Overview
There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 14 terminations. In total, there are 14 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 3mV. Through Hole is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. A supply current of 13.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain. Instrumentation amplifier has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 22V voltage. In this case, Excalibur? represents the instrumentation amplifiers' series number.
TLE2144AIN Features
14 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144AIN Applications
There are a lot of Texas Instruments TLE2144AIN Instrumentational OP Amps applications.
- Gaming industry
- Portable media players
- Proportional counter tubes
- Information processing
- PDA
- E-book readers
- Video computer boards
- Automatic control
- Strain gauges
- High gain DC amplifier
