Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
Excalibur™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLE2144 |
Pin Count |
16 |
Operating Supply Voltage |
22V |
Power Supplies |
5/+-15V |
Number of Channels |
4 |
Operating Supply Current |
13.8mA |
Nominal Supply Current |
18mA |
Output Current |
50mA |
Slew Rate |
45V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
700nA |
Voltage - Supply, Single/Dual (±) |
4V~44V ±2V~22V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
3.8mV |
Bandwidth |
5.8MHz |
Gain Bandwidth Product |
5.9MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
6000 kHz |
Voltage Gain |
99.55dB |
Average Bias Current-Max (IIB) |
1.6μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
600μV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
2μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
5.8MHz |
Max I/O Voltage |
3.8mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.1μA |
Height |
2.65mm |
Length |
10.3mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLE2144CDW Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. 16 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3.8mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 13.8mA . Voltage gain should remain at 99.55dB. The op amp ic has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 22V voltage. The Excalibur? stands for the buffer op amp's serial number.
TLE2144CDW Features
16 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144CDW Applications
There are a lot of Texas Instruments TLE2144CDW Instrumentational OP Amps applications.
- Comparator
- Video conversion and routing
- High input resistance broadband
- Multiplication circuits
- Ultrasound transducers
- RF cable systems
- Signal filtering
- Video amplifiers
- Laptop
- High gain DC amplifier