TLE2144CN
| Parameters | |
|---|---|
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | TLE2144 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Power Supplies | 5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 13.8mA |
| Nominal Supply Current | 18mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3.8mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 99.55dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 600μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 3.8mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
TLE2144CN Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 14 terminations over the past year. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3.8mV. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Operational amplifier can operate supply current at 13.8mA. Keeping the voltage gain at 99.55dB is the best course of action. There are 4 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 22V. The Excalibur? stands for the buffer op amp's serial number.
TLE2144CN Features
14 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144CN Applications
There are a lot of Texas Instruments TLE2144CN Instrumentational OP Amps applications.
- RF cable systems
- Micro signal measurement
- Exponential operation circuits
- Active probe
- Precision measurement
- Television broadcasting equipment
- Power generator
- Multiplication circuits
- Power transmission
- Video amplifiers
