banner_page

TLE2161ACD

80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V ±3.5V~18V TLE2161 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLE2161ACD
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 833
  • Description: 80mA per Channel 4pA 65 dB Instrumentational OP Amps 0.00006μA 18V ±3.5V~18V TLE2161 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Series Excalibur™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number TLE2161
Pin Count 8
Operating Supply Voltage 18V
Number of Elements 1
Operating Supply Current 290μA
Nominal Supply Current 35μA
Power Dissipation 725mW
Slew Rate 10V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 65 dB
Current - Input Bias 4pA
Voltage - Supply, Single/Dual (±) ±3.5V~18V
Output Current per Channel 80mA
Input Offset Voltage (Vos) 2.6mV
Bandwidth 5.8MHz
Gain Bandwidth Product 6.4MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 6400 kHz
Voltage Gain 98.06dB
Average Bias Current-Max (IIB) 0.00006μA
Low-Offset NO
Frequency Compensation YES AVCL>=5
Voltage - Input Offset 500μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000003μA
Programmable Power NO
Nominal Gain Bandwidth Product 5.8MHz
Max I/O Voltage 2.6mV
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLE2161ACD Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. Op amp ic rates 2.6mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. You can run this op amp ic on 290μA . Voltage gain should remain at 98.06dB. There are 1 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The Excalibur? indicates the series number of the op amp.

TLE2161ACD Features


8 Pins
supply voltage of 15V
98.06dB voltage gain

TLE2161ACD Applications


There are a lot of Texas Instruments TLE2161ACD Instrumentational OP Amps applications.

  • Power generator
  • High speed sample
  • High/low-pass filter circuit
  • Proportional operation circuits
  • Broadcasting
  • Mobile phone
  • Precision measurement
  • Multiplication circuits
  • Active probe
  • Integrator circuits

Write a review

Note: HTML is not translated!
    Bad           Good