TLE2161IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2161 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 290μA |
| Nominal Supply Current | 35μA |
| Power Dissipation | 725mW |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 3.1mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 6.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 600μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 3.1mV |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2161IDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a J-FET-type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3.1mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 290μA can be used to operate this linear amplifier. 98.06dB should be the voltage gain. 1 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For the packing of the instrumentation amplifier, TR is adopted. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2161IDR Features
8 Pins
supply voltage of 15V
98.06dB voltage gain
TLE2161IDR Applications
There are a lot of Texas Instruments TLE2161IDR Instrumentational OP Amps applications.
- Medical instruments
- Precision measurement
- Strain gauges
- Weighing systems
- Band-stop filter
- Television broadcasting equipment
- Ultrasound transducers
- RF cable systems
- Addition operation circuits
- Switching amplifier
