TLE2301INE
| Parameters | |
|---|---|
| Nominal Supply Current | 25mA |
| Power Dissipation | 2.075W |
| Output Current | 1A |
| Slew Rate | 14V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 283nA |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±4.5V~20V |
| Output Current per Channel | 3A |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 87dB |
| Average Bias Current-Max (IIB) | 0.45μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 400μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.45μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 7mV |
| Height | 5.08mm |
| Length | 19.8mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifiers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLE2301 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Elements | 1 |
| Operating Supply Current | 11mA |
TLE2301INE Overview
Op amp is packaged in 16-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifiers op amps in this case, and this device falls into one of them. The buffer op amp includes 16 pins. Regarding input offset voltage, buffer amplifier rates 7mV voltage. For this electrical component, Through Hole is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 11mA supply current, this operational amplifier ics can be operated. It is a member of the 87dB's 87dB family. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 20V. Excalibur? corresponds to the op amp's series.
TLE2301INE Features
16 Pins
supply voltage of 15V
87dB voltage gain
TLE2301INE Applications
There are a lot of Texas Instruments TLE2301INE Instrumentational OP Amps applications.
- Scintillation detectors
- Micro signal measurement
- Comparator
- Video data acquisition
- Band-pass filter
- Vehicle electronics
- Portable media players
- Proportional operation circuits
- Portable electronic products powered by batteries
- Switching amplifier
