TLE4226GNUMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE4226 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 50mA |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Nominal Supply Current | 50mA |
| Output Configuration | Low Side |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~5.25V |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 3.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLE4226GNUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).The 24-SOIC (0.295, 7.50mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.There is a maximum output voltage of Bipolar volts on this LED driver.It is part of the TLE4226 family of LED drivers.A total of 24 terminations can be found in it.The 24 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 50mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Surface Mount.A total of 24 pins are included in this LED driver.This case results in a 50mA output current.In this LED driver, the maximum supply voltage is configured to be 5.25V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.75V.
TLE4226GNUMA1 Features
Supplied from 5V
TLE4226GNUMA1 Applications
There are a lot of Infineon Technologies TLE4226GNUMA1 Power Switches ICs applications.
- Portable Music Players
- USB Ports/Hubs
- HDD and SSD
- PC Cards
- PC Card Hot Swap
- Telecom and Network Systems
- HDD, SSD
- Low Voltage I/O System Power
- Portable Devices
- USB3.1 Power Delivery
