TLE4240G
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 595 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Interface | Serial |
| Max Supply Voltage | 45V |
| Min Supply Voltage | 3V |
| Current - Output | 66mA |
| Max Output Voltage | 40V |
| Voltage - Output | 40V |
| Min Input Voltage | 3V |
| Max Input Voltage | 45V |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TLE4240G Overview
As part of the design of this LED driver, there are 1 outputs that have been used.5 terminations are used in its operation.Its configuration is based on 595 pins.There are 1 segments in it.Ideally, the supply voltage should be 45V.40V is the voltage output.5 pins are used on the device.Additionally, it is categorized into Display Drivers according to its characteristics.With 3V as the minimal input voltage, it operates.It achieves maximum efficiency with a minimal voltage supply of 3V.Whenever the maximum supply current is allowed, the value reaches 45V.It is important not to exceed 150°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.It is important to keep the output voltage below 40V.Keep the part's output current at 66mA volts.
TLE4240G Features
Supply voltage of 13.5V
TLE4240G Applications
There are a lot of Infineon Technologies TLE4240G LED Driver ICs applications.
- LED headlights
- OLED power supply for portable equipment
- Stage and Studio lighting
- Refrigeration lighting
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- General lighting
- Panel lighting
