TLE52052GPAUMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | SPT® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Applications | Automotive |
| HTS Code | 8542.39.00.01 |
| Technology | DMOS |
| Voltage - Supply | 5.3V~40V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 13.2V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | TLE5205 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 5A |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Voltage - Load | 5.3V~40V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLE52052GPAUMA1 Overview
This package is designed to work with [0].20-SOIC (0.433, 11.00mm Width) Exposed Padcases are included with the part.Surface Mountshould be used for mounting the part.In this case, it is appropriate for the component connected to Automotive.A device with a voltage range of 5.3V~40V volts is available.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.In this part, there are 20 terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 5.3V~40V.The amplifier should be set to 13.2V.Ideally, it should be mounted in the Surface Mountposition.The output current should be kept at 5A for the part.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Drivers controllers is based on the TLE5205 part number.20 pins are provided for its design.In this case, SPT?is maintained as the output voltage.
TLE52052GPAUMA1 Features
Applications : Automotive
Load voltage across the chip 5.3V~40V
base on TLE5205 number
TLE52052GPAUMA1 Applications
There are a lot of Infineon Technologies TLE52052GPAUMA1 motor drivers applications.
- Accurate LED current matching
- Tail lights
- Commercial office
- High brightness LED lighting
- Running preventive- maintenance diagnostics
- Step-up or step-down driver topologies
- RGB and monochromatic LED drivers for signage and traffic signals
- Dash
- General lighting
- Lighting for the ambience of tunability
