TLE62083GXUMA1
| Parameters | |
|---|---|
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| Series | SPT® |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 13.2V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE6208 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Output Voltage | 40V |
| Supply Voltage-Min (Vsup) | 6.1V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Current - Output | 600mA |
| Halogen Free | Halogen Free |
| Voltage - Load | 5.6V~40V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 1.75mm |
TLE62083GXUMA1 Overview
This package is designed to work with [0].Parts are packaged in 14-SOIC (0.154, 3.90mm Width)cases.Mounting the part by Surface Mountis recommended.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.Drivers controllers is possible to categorize the motor type as Brushed DC.This part provides 14terminations.In this case, the voltage can be applied to the load at the rate of 5.6V~40V.Drivers controllers is important to remember that this amplifier should be run at 13.2V.Surface Mountis its recommended mounting method.Maintain a 600mAoutput current for the part.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.Drivers controllers is based on the TLE6208 part number.This device is designed with a pin count of 14.The available outputs are [0].A constant voltage is maintained at 40V.SPT? is the main series of the part.
TLE62083GXUMA1 Features
Applications : General Purpose
Load voltage across the chip 5.6V~40V
base on TLE6208 number
designed with 3 outputs
TLE62083GXUMA1 Applications
There are a lot of Infineon Technologies TLE62083GXUMA1 motor drivers applications.
- A cross between entertainment
- Building technology
- PDAs
- RGB and monochromatic LED drivers for signage and traffic signals
- Alternative to HID lights
- LCD displays
- Large outdoor LED display
- Brake lights
- Camcorders
- High brightness LED lighting
