TLE6220GPNUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | SPI |
| Current - Output (Max) | 3A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 4.5A |
| Rds On (Typ) | 320m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
TLE6220GPNUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).This file is included in package 20-SOIC (0.433, 11.00mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 4.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A total of 20 terminations have been recorded.The LED driving board has a total of 1 functions.There is a maximum output of 3AV from the LED driver.Supply voltages of 5V allow for high efficiency.The Automotive, AEC-Q100 series includes this electrical component.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).
TLE6220GPNUMA1 Features
Supplied from 5V
TLE6220GPNUMA1 Applications
There are a lot of Infineon Technologies TLE6220GPNUMA1 Power Switches ICs applications.
- Hot Swap
- Wireless Headsets
- Storage Drives
- USB3.1 Power Delivery
- Portable Devices
- Notebook and Tablet Computers
- Mobile Communication Devices
- Telecom and Network Systems
- Portable/Handheld Devices
- Hard Disk Drives
