TLE6225GXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE6225 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 350mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 1.7 Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TLE6225GXUMA1 Overview
The package is in the form of a Tape & Reel (TR).The 20-SOIC (0.295, 7.50mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There is a default setting of 4 for output.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The TLE6225 family contains this object.It contains 20 terminations.It is necessary to use the 20 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 4 functions.This results in the maximum output current dropping to 350mA to meet the operation criteria.With a supply voltage of 12V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.In this case, the output current will be set to 350mA.In this case, Vsup (maximum supply voltage) is set to 32V.
TLE6225GXUMA1 Features
Supplied from 12V
TLE6225GXUMA1 Applications
There are a lot of Infineon Technologies TLE6225GXUMA1 Power Switches ICs applications.
- Hot-Swap Systems
- Various applications equipped with buttons
- USB Ports/Hubs
- Portable GPS Device
- USB Power Distribution
- HDD and SSD
- Gaming
- Hard Disk Drives
- Solid-State Drives
- Set-top-box
