TLE6232GPAUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE6232 |
| Pin Count | 36 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Interface | SPI |
| Current - Output (Max) | 550mA 1.1A |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 3.3W |
| Output Current | 1.5A |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Min Dual Supply Voltage | 45V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 250m Ω, 450m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLE6232GPAUMA2 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 6 outputs.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the TLE6232 family.In total, there are 36 terminations.In order to operate, 36 pins are used.As far as functions are concerned, the lighting driver has 6.From the lighting driver, there is a maximum output of 550mA 1.1AV.High efficiency is possible at 5V supply voltage.The LED driving board is mounted in the way of Surface Mount.36 pins are connected to it in total.The output current is set to 1.5A in this case.
TLE6232GPAUMA2 Features
Supplied from 5V
TLE6232GPAUMA2 Applications
There are a lot of Infineon Technologies TLE6232GPAUMA2 Power Switches ICs applications.
- Hard Disk Drives
- USB Power Distribution
- Hot-Swap Systems
- Hot Swap
- PDAs
- Set-Top Boxes
- HDD and SSD
- Hot Swap
- Solid State Drivers
- Portable/Handheld Devices
