TLE6232GPNUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Number of Outputs | 6 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Current - Output (Max) | 550mA 1.1A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 250m Ω, 450m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
TLE6232GPNUMA1 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package as well.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 6 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It contains 36 terminations.It is important to note that the LED driving board has 6 functions.In this case, the LED driving board can produce only 550mA 1.1AV as its maximum output.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The Automotive, AEC-Q100 series includes this electrical component.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.
TLE6232GPNUMA1 Features
Supplied from 5V
TLE6232GPNUMA1 Applications
There are a lot of Infineon Technologies TLE6232GPNUMA1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Gaming
- Hard Disk Drives
- Portable GPS
- HDD, SSD
- Solid State Drivers
- Hot-Swap Systems
- USB Power Distribution
- Telecom and Network Systems
- Portable GPS Device
