Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e0 |
Feature |
Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
1.7Ohm |
Terminal Finish |
TIN LEAD |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
2W |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
8 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TLE6236 |
Pin Count |
28 |
Number of Outputs |
8 |
Output Type |
N-Channel |
Max Output Current |
750mA |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
SPI |
Nominal Supply Current |
1.5mA |
Output Configuration |
Low Side |
Output Current |
200mA |
Max Supply Current |
1.5mA |
Switch Type |
General Purpose |
Output Current per Channel |
250mA |
Ratio - Input:Output |
1:8 |
Voltage - Load |
4.5V~5.5V |
Driver Number of Bits |
8 |
Fault Protection |
Open Load Detect, Over Temperature, Over Voltage |
Turn On Time |
10 μs |
Output Peak Current Limit-Nom |
0.75A |
Rds On (Typ) |
1.7 Ω |
Turn Off Time |
10 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height Seated (Max) |
2.65mm |
Width |
7.6mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
TLE6236G Overview
It is package in Tape & Reel (TR) case.The 28-SOIC (0.295, 7.50mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 8 outputs that are available for use.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Status Flag.It is a member of the TLE6236 family.A total of 28 terminations have been recorded.The 28 pins are used for the operation of the system.There are 8 functions of the LED driver.It is necessary to reduce the maximum output current to 750mA to meet the operation criteria.Supply voltages of 5V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.28 pins are connected to it in total.1.7Ohm resistance is present in the lighting driver.When this case is used, the output current is set to 200mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.5V is the power supply of the part.A maximum current requirement of 1.5mA is required for its operation.
TLE6236G Features
Supplied from 5V
Resistance of 1.7Ohm
TLE6236G Applications
There are a lot of Infineon Technologies TLE6236G Power Switches ICs applications.
- Wearable Devices
- Wireless/Networking Cards
- Hot-Swap Systems
- Notebook PC
- USB Power Distribution
- Portable Devices
- Handheld Devices
- PDAs
- USB3.1 Power Delivery
- Hot Swap