TLE6288RAUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE6288 |
| Pin Count | 36 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side or Low Side |
| Power Dissipation | 800mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 200 ns |
| Quiescent Current | 5mA |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~16V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3.6A |
| Rds On (Typ) | 150m Ω |
| Supply Voltage1-Nom | 12V |
| Turn Off Time | 20 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE |
| Supply Voltage1-Min | 6V |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLE6288RAUMA2 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has a total of 6 outputs.A supply voltage of 4.5V~5.5V is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Status Flag features.It is part of the TLE6288 family of LED drivers.It contains 36 terminations.The 36 pins are used for the operation of the system.It is important to note that the LED driving board has 6 functions.The supply voltage can be 5V for high efficiency.As a result, it is mounted in the manner of Surface Mount.In total, it has 36 pins.When this is the case, the output current is set to 2A.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
TLE6288RAUMA2 Features
Supplied from 5V
TLE6288RAUMA2 Applications
There are a lot of Infineon Technologies TLE6288RAUMA2 Power Switches ICs applications.
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless Headsets
- USB Power Distribution
- Set-Top Boxes
- Wireless/Networking Cards
- Solid State Drivers
- PC Card Hot Swap
- Portable Video Game Players
- Handheld Devices
