TLE72092RAUMA4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 28V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 30mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 5A |
| Quiescent Current | 20mA |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Voltage - Load | 5V~28V |
| Min Current Limit | 5.5A |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLE72092RAUMA4 Overview
This package is designed to work with [0].The part is packaged in a 20-SOIC (0.433, 11.00mm Width) Exposed Pad case.The part should be mounted by Surface Mount.For the component connected to [0], it is suitable.There is a capability for the device to provide 5V~28V volts.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Motors can be classified as Brushed DC.The part supports 20terminations.Drivers controllers is possible to apply voltage to the load at the rate of 5V~28V.Surface Mountis its recommended mounting method.The output current should be kept at 5A for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.20pins are available on the device.A voltage of 28V is used as the supply voltage for this driver.
TLE72092RAUMA4 Features
Applications : General Purpose
Load voltage across the chip 5V~28V
TLE72092RAUMA4 Applications
There are a lot of Infineon Technologies TLE72092RAUMA4 motor drivers applications.
- Human-centric lighting
- Street lights
- Landscape lighting
- Automotive instrumentation
- Infotainment backlighting
- High power LED street light
- Building technology
- RGB and monochromatic LED drivers for signage and traffic signals
- Large format LED backlighting
- Tail lights
