TLE7230RNUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 60 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 60 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
TLE7230RNUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 8 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Status Flag features.As a result, there are 36 terminations.The LED driving board has a total of 1 functions.The supply voltage can be 5V for high efficiency.It is equipped with a total of 36 pins.This electrical component can be found in the Automotive, AEC-Q100 series.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.
TLE7230RNUMA1 Features
Supplied from 5V
TLE7230RNUMA1 Applications
There are a lot of Infineon Technologies TLE7230RNUMA1 Power Switches ICs applications.
- Wearable Devices
- PC Card Hot Swap
- Portable/Handheld Devices
- USB Protection
- Notebook and Tablet Computers
- Set-top-box
- Portable Music Players
- Set-Top Boxes
- Mobile Communication Devices
- Handheld Devices
