TLE7232GS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TLE7232 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Output Current | 240mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Max Supply Current | 3mA |
| Switch Type | General Purpose |
| Output Current per Channel | 240mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 60 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 1 Ω |
| Turn Off Time | 60 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TLE7232GS Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 24-SSOP (0.154, 3.90mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.It is possible to use 8 outputs in the lighting driver.Operation is based on a supply voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.It is part of the TLE7232 family of LED drivers.A total of 24 terminations can be found in it.24 pins are used for operation.It consists of 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.With a supply voltage of 5V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.In total, it has 24 pins.1Ohm resistance is present in the lighting driver.In this case, the output current is set to 240mA.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It operates at a maximum current of 3mA.
TLE7232GS Features
Supplied from 5V
Resistance of 1Ohm
TLE7232GS Applications
There are a lot of Infineon Technologies TLE7232GS Power Switches ICs applications.
- Portable Music Players
- PC Cards
- USB Power Distribution
- USB Ports/Hubs
- Hot Swaps
- Solid State Drivers
- PC Card Hot Swap
- Solid-State Drives
- Portable GPS Device
- Portable Devices
