banner_page

TLE7233GXUMA1

N-Channel 0.65mm PMIC TLE7233 24 Pin 5V 24-SSOP (0.154, 3.90mm Width)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-TLE7233GXUMA1
  • Package: 24-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 568
  • Description: N-Channel 0.65mm PMIC TLE7233 24 Pin 5V 24-SSOP (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.154, 3.90mm Width)
Number of Pins 24
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2014
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLE7233
Pin Count 24
Number of Outputs 4
Output Type N-Channel
Max Output Current 390mA
Interface SPI
Nominal Supply Current 5mA
Output Configuration Low Side
Output Current 390mA
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Quiescent Current 10A
Switch Type General Purpose
Halogen Free Halogen Free
Drain to Source Voltage (Vdss) 54V
Ratio - Input:Output 1:4
Voltage - Load 4.5V~5.5V
Max Dual Supply Voltage 54V
Fault Protection Open Load Detect, Over Temperature
Turn On Time 60 μs
Rds On (Typ) 1 Ω
Turn Off Time 60 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height Seated (Max) 1.75mm
Length 8.65mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLE7233GXUMA1 Overview


A Tape & Reel (TR) is used to package it.It is included with the 24-SSOP (0.154, 3.90mm Width) package as well.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 4 for output.The LED driving board operates with a supply voltage of 3V~5.5V.The maximum output voltage is N-Channel volts.There is a TLE7233 family of things that it belongs to.It contains 24 terminations.The 24 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 390mA when operation criteria are met.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.In this case, the output current will be set to 390mA.

TLE7233GXUMA1 Features


Supplied from 5V

TLE7233GXUMA1 Applications


There are a lot of Infineon Technologies TLE7233GXUMA1 Power Switches ICs applications.

  • USB Ports/Hubs
  • USB Power Distribution
  • Hot-Swap Systems
  • Portable GPS Device
  • Wireless/Networking Cards
  • Wearable Devices
  • USB Protection
  • Mobile Communication Devices
  • USB Power Distribution
  • Various applications equipped with buttons

Write a review

Note: HTML is not translated!
    Bad           Good