TLE7234EM
| Parameters | |
|---|---|
| Package / Case | LSSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Packaging | Tape & Reel |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1.6Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 8 |
| Interface | Serial |
| Nominal Supply Current | 15mA |
| Quiescent Current | 10μA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 500mA |
| Driver Number of Bits | 8 |
| Screening Level | AEC-Q100 |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Rds On Max | 1.9 Ω |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 16V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TLE7234EM Overview
As part of the LSSOP package, it is included.Channel 8 is currently available.It's packaged in a Tape & Reel shape.The 24 terminations total to three.This device has a terminal position of DUAL.The device has a total of 24 pins.An efficient supply voltage is possible with 5V.Hot-swappable device is necessary to use 24 pins in order to operate the device.Despite its self-contained nature, Peripheral Drivers is a very compact device.Stable operation is enabled by a maximum operating temperature of 150°C°C.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.For normal operation, the supply voltage (Vsup) should be kept above 3V in order to maintain a constant level of power.5.5V (maximum supply voltage) is set.Part 3.3/5V uses a power supply that has a voltage.Consequently, 1A is the maximum output current that can be achieved to meet the operation criteria.1.6Ohm-resistance is one of the characteristics of the device.
TLE7234EM Features
The terminal position of 24
TLE7234EM Applications
There are a lot of Infineon Technologies TLE7234EM hot swap controllers applications.
- Servers
- Datacom
- Active current limit
- Remote access server
- Storage network
- Industrial
- Industrial high-side switches
- Network switch
- Other forms of communications infrastructure
- Networking
