TLE7234SEXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE7234 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 280mA |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 140mA 280mA |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 10A |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 52V |
| Ratio - Input:Output | 3:8 |
| Voltage - Load | 9V~16V |
| Max Dual Supply Voltage | 52V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 100 μs |
| Output Peak Current Limit-Nom | 0.41A |
| Rds On (Typ) | 850m Ω, 1.6 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 5.5V |
| Height Seated (Max) | 2.65mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE7234SEXUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 20-SOIC (0.295, 7.50mm Width) package, it is included.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has a total of 8 outputs.Operation is based on a supply voltage of 3V~5.5V.A maximum output voltage of N-Channel volts has been specified.It comes under the family of TLE7234.It contains 20 terminations.During operation, the 20 pins are used.It contains 1 functions.140mA 280mAV is the maximum output of the LED driver.The maximum output current drops to 280mA in order to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.20 pins are equipped with it.For normal operation, the supply voltage (Vsup) should be kept above 3V.
TLE7234SEXUMA1 Features
Supplied from 5V
TLE7234SEXUMA1 Applications
There are a lot of Infineon Technologies TLE7234SEXUMA1 Power Switches ICs applications.
- Portable GPS Device
- HDD and SSD
- Solid-State Drives
- Gaming
- Mobile Communication Devices
- Hot-Swap Systems
- USB Power Distribution
- Smartphone and PDA
- PC Cards
- PC Card Hot Swap
