TLE7235EMXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLE7235 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 350mA |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 175mA 350mA |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 10A |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 52V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 9V~16V |
| Max Dual Supply Voltage | 52V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 100 μs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 900m Ω, 1.6 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 9V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLE7235EMXUMA1 Overview
A Tape & Reel (TR) is used to package it.It is included with the 24-LSSOP (0.154, 3.90mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 8 outputs.To operate, it needs a supply voltage of 3V~5.5V.It has a maximum output voltage of N-Channel volts.It is a member of the TLE7235 family.The termination count is 24.In order to operate, the 24 pins are used.There are 1 functions of the LED driver.175mA 350mAV is the maximum output of the LED driver.The maximum output current is reduced to 350mA to meet the operation criteria.A supply voltage of 5V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.A total of 24 pins are included in this LED driver.The supply voltage (Vsup) should be kept above 3V for normal operation.
TLE7235EMXUMA1 Features
Supplied from 5V
TLE7235EMXUMA1 Applications
There are a lot of Infineon Technologies TLE7235EMXUMA1 Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD and SSD
- Portable/Handheld Devices
- Hot-Swap Systems
- USB Power Distribution
- Solid State Drivers
- Portable Video Game Players
- USB Protection
- Telecom and Network Systems
- Portable Devices
