TLE7235G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.6Ohm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE7235 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 280mA |
| Power Supplies | 3.3/5V |
| Interface | SPI |
| Current - Output (Max) | 140mA 280mA |
| Output Configuration | High Side or Low Side |
| Output Current | 140mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Max Supply Current | 15mA |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 9V~16V |
| Driver Number of Bits | 8 |
| Fault Protection | Open Load Detect, Over Temperature |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 0.41A |
| Rds On (Typ) | 850m Ω, 1.6 Ω |
| RoHS Status | RoHS Compliant |
TLE7235G Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 20-SOIC (0.295, 7.50mm Width) package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver is equipped with 8 outputs.To operate, it needs a supply voltage of 3V~5.5V.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the family TLE7235.A total of 20 terminations have been found in it.The operation is carried out using the 24 pins.Its maximum output voltage is 140mA 280mAV.To meet the operation criteria, the maximum output current drops to 280mA.As a result, it has a total of 20 pins.Currently, the LED driving board has a resistance of 1.6Ohm ohms.When this is the case, the output current is set to 140mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 3.3/5V volts.It requires a maximum current requirement of 15mA.
TLE7235G Features
Resistance of 1.6Ohm
TLE7235G Applications
There are a lot of Infineon Technologies TLE7235G Power Switches ICs applications.
- Notebook and Tablet Computers
- Solid State Drivers
- USB3.1 Power Delivery
- Portable Music Players
- PDAs
- Portable Devices
- Mobile Communication Devices
- Set-top-box
- Telecom and Network Systems
- Hard Disk Drives
