TLE7235SE
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.6Ohm |
| Terminal Finish | TIN |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 8 |
| Quiescent Current | 10μA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 410mA |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 8 |
| Screening Level | AEC-Q100 |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 0.41A |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Rds On Max | 1.8 Ω |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 16V |
| Height Seated (Max) | 2.65mm |
| Width | 7.6mm |
| RoHS Status | RoHS Compliant |
TLE7235SE Overview
The SOIC package contains it.Channel 8 is currently available.Tape & Reel (TR)-shaped packaging is used for this product.The terminations total 20.In this case, the device is located at terminal DUAL.A total of 20 pins are present on it.High efficiency can be achieved with a voltage supply of 5V.This device uses 20 pins for operation.Peripheral Drivers contains this gadget on its own.The maximum operating temperature of 150°C°C allows for stable operation.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.For normal operation, the supply voltage (Vsup) should be kept above 3V in order to maintain a constant level of power.Set Vsup to 5.5V for maximum supply voltage.Hot-swappable device has a 3.3/5V power supply, which is the power supply used in the part.1A is the maximum output current required to meet the operation criteria.There is 1.6Ohm resistance in the device.
TLE7235SE Features
The terminal position of 20
TLE7235SE Applications
There are a lot of Infineon Technologies TLE7235SE hot swap controllers applications.
- Redundant-array-of-independent-disk (RAID) storage
- Electric vehicle
- Redundant Array of Disks (RAID)
- PC board hot swap insertion and removal
- Board or blade insertion into live backplanes
- Power monitoring
- Data communication systems
- Undervoltage protection
- Short-circuit protection in real time
- Continuous monitoring of device temperature
