TLE7235SEXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE7235 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 280mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 140mA 280mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 9V~16V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 100 μs |
| Output Peak Current Limit-Nom | 0.41A |
| Rds On (Typ) | 850m Ω, 1.6 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 16V |
| Height Seated (Max) | 2.65mm |
| Width | 7.6mm |
| RoHS Status | RoHS Compliant |
TLE7235SEXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).The 20-SOIC (0.295, 7.50mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 8 outputs available on this lighting driver.With a supply voltage of 3V~5.5V, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the TLE7235 family.A total of 20 terminations can be found in it.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 140mA 280mAV.It is necessary to reduce the maximum output current to 280mA to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.20 pins are equipped with it.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 3V.
TLE7235SEXUMA1 Features
Supplied from 5V
TLE7235SEXUMA1 Applications
There are a lot of Infineon Technologies TLE7235SEXUMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Telecom and Network Systems
- Hot Swap
- Hot-Swap Systems
- HDD, SSD
- Portable Devices
- Smart Phones, Feature Phones
- Wearable Devices
- USB Power Distribution
- Wireless Modem Data Cards
