TLE7236EMXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLE7236 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 350mA |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 175mA 350mA |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 10A |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 52V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 9V~16V |
| Max Dual Supply Voltage | 52V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 100 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Rds On (Typ) | 900m Ω, 1.6 Ω |
| Turn Off Time | 100 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLE7236EMXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).The 24-LSSOP (0.154, 3.90mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.As a default, the output is set to 8.A supply voltage of 3V~5.5V is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is a member of the TLE7236 family.It consists of 18 terminations in total.The operation is performed through the 24 pins.It consists of 1 functions.The LED driver output is limited to 175mA 350mAV.It is necessary to reduce the maximum output current to 350mA to meet the operation criteria.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.There are 18 pins in total on this board.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.
TLE7236EMXUMA1 Features
Supplied from 5V
TLE7236EMXUMA1 Applications
There are a lot of Infineon Technologies TLE7236EMXUMA1 Power Switches ICs applications.
- Portable Music Players
- Notebook and Tablet Computers
- USB Protection
- Hot-Swap Systems
- Hot Swaps
- Telecom and Network Systems
- Solid State Drivers
- USB Ports/Hubs
- Wearable Devices
- USB Power Distribution
