TLE7241EXUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ALSO REQIRES 9 TO 18 VBB SUPPLY |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TLE7241 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | SPI |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 1.2A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 9V~18V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 240m Ω |
| Width | 7.6mm |
TLE7241EXUMA1 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 20-SOIC (0.295, 7.50mm Width) Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is Relay, Solenoid Driver.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of 4.75V~5.25V.The maximum output voltage of this LED driver is N-Channel volts.There are Slew Rate Controlled features available on the LED driving board.The TLE7241 family contains this object.It contains 20 terminations.It is important to note that the LED driving board has 2 functions.This lighting driver is capable of delivering a maximum output of 1.2A volts.A supply voltage of 5V leads to high efficiency.The LED driving board is equipped with a total of 20 pins.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.75V.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.By using this lighting driver, it is also possible to produce ALSO REQIRES 9 TO 18 VBB SUPPLY.
TLE7241EXUMA1 Features
Supplied from 5V
Additional features like ALSO REQIRES 9 TO 18 VBB SUPPLY
TLE7241EXUMA1 Applications
There are a lot of Infineon Technologies TLE7241EXUMA1 Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- USB3.1 Power Delivery
- PC Cards
- Notebook and Tablet Computers
- PC Card Hot Swap
- Telecom and Network Systems
- Gaming
- Low Voltage I/O System Power
- PDAs
