TLE7244SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE7244 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 290mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Open Load Detect, Over Temperature |
| Screening Level | AEC-Q100 |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.29A |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TLE7244SL Overview
The package is in the form of a Tape & Reel (TR).This package is included in 24-SSOP (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 8 outputs in the lighting driver.The LED driving board operates at 3V~5.5V volts.There is a maximum output voltage of N-Channel volts on this LED driver.I believe it belongs to the TLE7244 family.It contains 24 terminations.Currently, there are 1 functions associated with the lighting driver.This LED driver has a maximum output of 290mAV.The supply voltage can be 5V for high efficiency.As a result, it has a total of 24 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.This part is powered by 3.3/55V.
TLE7244SL Features
Supplied from 5V
TLE7244SL Applications
There are a lot of Infineon Technologies TLE7244SL Power Switches ICs applications.
- Portable GPS
- Various applications equipped with buttons
- Portable Video Game Players
- Hot Swap
- Hard Disk Drives
- PC Card Hot Swap
- Mobile Communication Devices
- Hot Swap
- Hot Swaps
- Handheld Devices
