TLE7244SLXUMA2
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Max Dual Supply Voltage | 54V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.29A |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Rds On Max | 1.7 Ω |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 290mA |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 290mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 10μA |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 54V |
TLE7244SLXUMA2 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 24-SSOP (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type of this switch is Relay, Solenoid Driver.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver has a total of 8 outputs that are available for use.In order to operate, it requires a voltage supply of 3V~5.5V.There is a maximum output voltage of N-Channel volts.It has a total of 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 290mA.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 24 pins are present on it.It is set to 290mA in this case.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.
TLE7244SLXUMA2 Features
Supplied from 5V
TLE7244SLXUMA2 Applications
There are a lot of Infineon Technologies TLE7244SLXUMA2 Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- Storage Drives
- Wireless Headsets
- Hard Disk Drives
- Solid-State Drives
- Portable Devices
- Smart Phones, Feature Phones
- PC Card Hot Swap
- PDAs
