TLE75008EMDXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TLE75008EMDXUMA2 Overview
It is package in Tape & Reel (TR) case.The 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package contains it.The LED driver is mounted as Surface Mount.This switch is of type Relay, Solenoid Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 8 outputs in the lighting driver.It uses a supply voltage of 3V~5.5V to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of 24 terminations.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 330mA V.As long as the supply voltage is 5V, high efficiency can be achieved.A maximum supply voltage of 5.5V is set in Vsup.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.
TLE75008EMDXUMA2 Features
Supplied from 5V
TLE75008EMDXUMA2 Applications
There are a lot of Infineon Technologies TLE75008EMDXUMA2 Power Switches ICs applications.
- Portable GPS Device
- Portable/Handheld Devices
- Various applications equipped with buttons
- Smartphone and PDA
- USB Power Distribution
- Hot-Swap Systems
- Hot Swaps
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Storage Drives
