TLE75080EMDXUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Supplier Device Package | PG-SSOP-24-9 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 1Ohm |
| RoHS Status | ROHS3 Compliant |
TLE75080EMDXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package that includes it.A Surface Mount mounting is used for the LED driving board.The switch type is Relay, Solenoid Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of 3V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.This lighting driver is capable of delivering a maximum output of 330mA volts.
TLE75080EMDXUMA1 Features
TLE75080EMDXUMA1 Applications
There are a lot of Rochester Electronics, LLC TLE75080EMDXUMA1 Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Power Distribution
- Hot-Swap Systems
- HDD and SSD
- Wireless/Networking Cards
- Wearable Devices
- Wireless Modem Data Cards
- Set-top-box
- Hard Disk Drives
- Hot Swap
