TLE75080EMHXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | 0.10 (2.54mm) Tip Length |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
TLE75080EMHXUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.Relay, Solenoid Driver is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 8 outputs.In order to operate, it requires a voltage supply of 3V~5.5V.The maximum output voltage is N-Channel volts.There are 0.10 (2.54mm) Tip Length features available on the LED driving board.It contains 24 terminations.It contains 1 functions.The maximum output of the LED driving board is 330mAV.A supply voltage of 5V leads to high efficiency.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.
TLE75080EMHXUMA1 Features
Supplied from 5V
TLE75080EMHXUMA1 Applications
There are a lot of Infineon Technologies TLE75080EMHXUMA1 Power Switches ICs applications.
- Portable GPS Device
- USB Power Distribution
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Hot Swaps
- Gaming
- Smart Phones, Feature Phones
- Solid State Drivers
- PC Card Hot Swap
