TLE75242EMDXUMA1
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Surface Mount | YES |
| Supplier Device Package | PG-SSOP-24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
TLE75242EMDXUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It has been mounted as Surface Mount on the LED driver.Relay, Solenoid Driver is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 8 outputs available on this lighting driver.The LED driving board is powered by a voltage of 3V~5.5V.It has a maximum output voltage of N-Channel volts.It consists of 24 terminations in total.The LED driving board has a total of 1 functions.The maximum output of the LED driving board is 330mAV.The supply voltage can be 5V for high efficiency.The Vsup value (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 3V.
TLE75242EMDXUMA1 Features
Supplied from 5V
TLE75242EMDXUMA1 Applications
There are a lot of Infineon Technologies TLE75242EMDXUMA1 Power Switches ICs applications.
- USB Ports/Hubs
- Hot Swap
- Wireless Modem Data Cards
- Storage Drives
- Portable/Handheld Devices
- Hard Disk Drives
- Solid-State Drives
- PC Card Hot Swap
- USB Protection
- Hot Swaps
