TLE75602EMDXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 5A |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 55V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Max Dual Supply Voltage | 55V |
| Fault Protection | Open Loop, Over Load, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
TLE75602EMDXUMA1 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 24-LSSOP (0.154, 3.90mm Width) Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of Relay, Solenoid Driver.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver is equipped with 8 outputs.Operation is based on a supply voltage of 3V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.In total, there are 24 terminations.As far as functions are concerned, the lighting driver has 1.The maximum output of the LED driving board is 330mAV.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.
TLE75602EMDXUMA1 Features
Supplied from 5V
TLE75602EMDXUMA1 Applications
There are a lot of Infineon Technologies TLE75602EMDXUMA1 Power Switches ICs applications.
- HDD and SSD
- PC Cards
- Smartphone and PDA
- Hard Disk Drives
- USB Power Distribution
- Portable Music Players
- Portable Video Game Players
- Solid State Drivers
- Telecom and Network Systems
- Various applications equipped with buttons
