TLE75602EMHXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 5A |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 55V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Max Dual Supply Voltage | 55V |
| Fault Protection | Open Loop, Over Load, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
TLE75602EMHXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package.The LED driver is mounted as Surface Mount.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 8 outputs.In order to operate, it requires a voltage supply of 3V~5.5V.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A total of 24 terminations have been recorded.There are 1 functions of the LED driver.330mAV is the maximum output of the LED driver.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.
TLE75602EMHXUMA1 Features
Supplied from 5V
TLE75602EMHXUMA1 Applications
There are a lot of Infineon Technologies TLE75602EMHXUMA1 Power Switches ICs applications.
- Solid State Drivers
- Wireless Modem Data Cards
- Portable Devices
- Portable GPS Device
- USB Power Distribution
- Notebook and Tablet Computers
- Gaming
- Set-Top Boxes
- Wireless/Networking Cards
- PDAs
